Introduction
A Friction Overhead Conveyor is a modular, motor-driven suspended transport system that uses friction between the drive wheels and the conveyor chain/track to move the load.
Features
High-efficiency friction drive technology
The Friction Overhead Conveyor use polyurethane drive wheels (hardness 85±5 Shore A), with a friction coefficient of 0.4-0.6, which increases the driving force by 30% compared to ordinary rubber wheels.
High-strength track system
Our tracks are made of Q355B low-alloy steel (yield strength 355MPa) and are hot-dip galvanized (zinc layer thickness ≥80μm). Through finite element analysis optimization, the deflection is less than 0.1% under a load of 1000kg, and the salt spray test life is 15 years.
Low-energy operation design
The drive motor of our product adopts IE4 energy efficiency level, combined with frequency conversion control technology, the energy consumption is reduced by 40% compared to the traditional chain conveyor system.
Quiet operation performance
The drive wheel adopts precise dynamic balancing calibration (unbalance ≤0.5g·cm), combined with polyurethane shock-absorbing pads, the operating noise is controlled below 60dB(A), which is 20dB lower than the chain system.
Hot Tags: friction overhead conveyor, China friction overhead conveyor manufacturers, suppliers, factory, friction conveyor with conveyor tracks, friction conveyor for construction industry, friction conveyor efficiency, friction conveyor for management collaboration, friction conveyor for workforce management, friction conveyor for metal industry
