Steel Coil Air Cooling Line

Steel Coil Air Cooling Line

The steel coil air cooling line is a conveying and cooling system specifically designed for hot-rolled steel coils, aluminum coils, and other metal coils. It smoothly transfers high-temperature coils via overhead tracks and carriers, utilizing forced air cooling or natural convection to achieve controlled temperature reduction after heat treatment.
Send Inquiry

This steel coil air cooling line typically uses heavy-duty overhead chains or floor chain carts as conveying carriers. Coils are placed on specially designed V-shaped saddles and travel steadily through the cooling chamber along a predetermined route. The cooling section is equipped with industrial axial fans and exhaust systems, controlling air speed and volume by zones to prevent internal stress cracks caused by localized rapid cooling.

 

Product Applications

Application Field

Typical Coils

Matching Features

Steel & Metallurgy

Hot-rolled steel coils, wire rods

Withstands high-temperature radiation, carries multi-ton dead weight

Aluminum Processing

Aluminum sheet coils, strip coils

Uniform cooling, prevents surface oxidation discoloration

Copper & Alloys

Copper strip coils, rod coils

Controllable cooling takt, meets hardness requirements for downstream processing

 

Customization Services

 

 

Air Cooling System Customization

Calculate heat load and customize fan power and duct layout based on coil weight, initial temperature, and target takt; forced convection or air-mist hybrid cooling solutions available.

 
 

Carrier Line Design

Customize overhead chain routing or floor cart tracks based on workshop beams and annealing furnace exit heights, ensuring seamless transition between air cooling, transfer, and unloading.

 
 

High-temperature Component Selection

For high-temperature radiation zones, customize high-temperature bearings, heat shields, and high-temperature grease to ensure equipment lifespan in harsh thermal environments.

 
 

Temperature Control and Safety Interlock

Integrate infrared thermometers with PLC systems; when coil temperature has not dropped to the set threshold, automatically lock the next process to prevent personnel burns or coil stacking oxidation.

 
11 - .jpg
image-20250515173245-5.jpeg

 

FAQ

Q: How to solve the jamming of overhead chains in high-temperature environments on the steel coil air cooling line?

A: Conventional grease easily runs off and cokes at high temperatures. It is recommended to use high-temperature synthetic grease for high-temperature sections and install heat shields on chains. Additionally, the take-up station should be equipped with automatic lubrication devices to prevent chain joint seizure from lack of oil.

Q: How is uniform cooling ensured when steel coils of different diameters are cooled on the same air cooling line?

A: Adjustable guide vanes can be configured at duct grilles, with fan frequency adjusted according to coil diameter; for large-diameter thick coils, increased air cooling dwell time or top-and-bottom dual blowing designs can be adopted to eliminate internal-external temperature differences.

Q: What might cause coils to run off-center or derail on the cooling line?

A: This may be caused by V-shaped saddle positioning dimensions not matching the coil diameter, or excessive clearance from worn guide wheels on the overhead trolley. Regular calibration of saddle concentricity and inspection of trolley pins and running wheel wear are required.

 

 

 

Hot Tags: steel coil air cooling line, China steel coil air cooling line manufacturers, suppliers, factory, overhead conveyor agriculture handling, overhead conveyor customer testimonials, overhead conveyor development, overhead conveyor drum handling technology, overhead conveyor food handling, overhead conveyor testing