Coil Conveyor System

Coil Conveyor System

The coil conveyor system is a heavy-duty handling system specifically designed for metal coils (such as steel and aluminum coils), safely transferring coils from storage to processing and outbound through load carts or heavy-duty roller tracks.
Send Inquiry

This coil conveyor system is designed to handle concentrated loads ranging from several tons to tens of tons. The system typically uses heavy-duty roller tracks (V-shaped rollers) or chain-driven carts, combined with hydraulic lifting or tilting mechanisms, to smoothly move coils between uncoiling, slitting, and cross-cutting processes, preventing surface scratches or edge damage.

 

Product Applications

 

Application Scenario

Typical Materials

Matching Features

Steel & Metallurgy Shops

Heavy steel coils, aluminum coils

High load capacity, impact-resistant, adapts to high temps and dust

Automotive Sheet Lines

Automotive sheet metal, galvanized coils

Prevents surface indentations, requires lift integration with processing equipment

Metal Packaging & Slitting

Tinplate, narrow strip coils

Requires centering and positioning to prevent edge collision deformation

Customization Services

 

Load Fixture Customization: Customize V-shaped saddles or U-shaped brackets based on coil diameter and weight, lined with polyurethane or wear-resistant rubber to prevent metal surface scratches.

Line Docking and Lifting: For equipment at different heights such as uncoilers and shears, customize hydraulic lifting sections or vertical lifts to achieve precise coil alignment.

Offset Prevention and Centering Control: Configure photoelectric edge sensors and automatic centering pushers to ensure coils do not deviate from the track center during long-distance conveying.

Safety Protection Enhancement: Configure buffer damping devices at coil drop points to prevent equipment damage from heavy-load impact; the system can interlock with PLC and safety light curtains.

image-20250515174610-4.png

 

FAQ

Q: How can roller bearing damage be improved when the coil conveyor system transports heavy coils?

A: It is recommended to use heavy-duty double-row spherical roller bearings and add a centralized lubrication system. Buffer pads should be added at coil drop points to reduce instantaneous impact stress on bearings.

Q: What might cause coils to run off-center on the roller track?

A: This is usually caused by non-parallel roller installation or height differences on both sides. The roller track's levelness and diagonal error should be recalibrated, and the V-shaped roller angle checked for accuracy.

Q: How to prevent surface indentations on metal coils during conveying?

A: Contact surfaces of rollers or saddles should be coated with polyurethane or high-molecular polyethylene, while keeping contact surfaces clean to prevent iron chips or hard particles from being pressed into the coil surface under heavy loads.

 

 

Hot Tags: coil conveyor system, China coil conveyor system manufacturers, suppliers, factory, overhead conveyor best practices, overhead conveyor emerging markets, overhead conveyor inspection, overhead conveyor public relations, overhead conveyor textile handling, overhead conveyor user manual