The core of this paint shop conveyor system lies in its environmental adaptability. The system typically uses enclosed track or skid conveying forms to prevent lubricating grease from dripping and contaminating workpiece surfaces. Drive motors and bearing components require high protection ratings to resist moisture and chemical mist from wash tanks, while track sections passing through curing ovens must reserve thermal expansion gaps to prevent high-temperature deformation and jamming.
Core Component Material Specifications
|
Component |
Material & Specification |
Function |
|
Track & Chain |
16Mn alloy steel, joint clearance ≤0.33mm |
Load-bearing and traction, prevents paint mist adhesion |
|
Skid Support Block |
Stainless steel or heat-resistant alloy, anti-corrosion coating |
Supports bodies, prevents chemical liquid retention |
|
Drive Unit |
SEW reducer motor, high protection rating |
Provides power, resists hot-humid environments |
|
Lubrication System |
High-temp synthetic grease, oil mist/grease auto-injection |
Reduces wear, prevents drip contamination |
Product Craftsmanship

Enclosed Anti-drip Design: Power chains are housed in enclosed C-channels or trenches, combined with oil mist lubrication devices, eliminating lubricant dripping onto vehicle body surfaces.
High-temperature Section Thermal Expansion Treatment: Tracks passing through curing ovens use cold-formed processes, with expansion joints reserved during installation to prevent track distortion or chain jamming at high temperatures.
Anti-corrosion Surface Treatment: Frames and skids in pretreatment and e-coat zones undergo shot blasting and anti-corrosion coating, or use stainless steel materials to resist acid-alkali mist erosion.
Dust Prevention and Cleaning Mechanism: Brushes or air blow devices are configured at track ends and take-up stations to promptly remove paint mist and dust, preventing accumulation from increasing trolley running resistance.
FAQ
Q: Will the chain lubricating grease from the paint shop conveyor system drip onto vehicle bodies?
A: Systems with enclosed track designs effectively prevent dripping. Lubrication devices are typically arranged in enclosed chain sections or above drip pans; additionally, high-temperature grease with strong adhesion and low throw-off should be used, and sealing brush wear should be regularly checked.
Q: Will the track deform due to the high temperatures in the paint shop curing oven?
A: Thermal expansion must be calculated in the track design, with expansion joints set at connections or near drive stations. If temperature rises are severe, heat-resistant alloy steel tracks are recommended, with reinforced support for track sections passing through ovens to prevent sagging.
Q: Can the mist from pretreatment wash tanks cause drive bearings to rust and jam?
A: Conventional bearings are highly susceptible to damage in hot-humid chemical mist. The system should use heavy-duty bearings with dust-proof seals, and key drive stations can add protective covers; daily inspections should observe whether liquid has penetrated bearing end caps.
Hot Tags: paint shop conveyor system, China paint shop conveyor system manufacturers, suppliers, factory, overhead conveyor distribution technology, overhead conveyor drum handling, overhead conveyor furniture handling, overhead conveyor local market, overhead conveyor width, overhead conveyor word of mouth marketing

