Automotive Conveyor System

Automotive Conveyor System

The automotive conveyor system is a comprehensive material handling network designed for the four major automotive manufacturing processes (stamping, welding, painting, and final assembly), connecting the flow of bodies, components, and powertrains between processes.
Send Inquiry

This automotive conveyor system is not a single piece of equipment but combines overhead chains, skids, floor chains, and friction drives based on workshop layout. The system must handle smooth transfer of heavy car bodies, high-precision station stopping, and flexible scheduling during mixed-model production, serving as the core logistics artery ensuring automotive line takt.

 

Application Scenarios

 

Automotive Process

Typical Carriers

Scenario Matching Features

Welding Shop

Skids, transfer carts

Carries body-in-white, adapts to multi-model fixture switching

Paint Shop

Skids (heat-resistant)

Passes through pretreatment and curing ovens, corrosion and dust resistant

Final Assembly

Floor slat chains, friction carts

Moderate platform height, facilitates two-sided manual and robotic work

 

Quality Inspection and Control

 

 

01.

Incoming Material Verification

Track steel (e.g., 16Mn alloy steel) requires material certificates and straightness checks; power chains (45Mn2 links, 50Mn pins) are sampled for breaking load (rated 186kN) compliance.

02.

Track Accuracy Verification

Laser alignment instruments check track straightness during installation, with joint clearances strictly controlled within 0.33mm to prevent trolley vibration.

03.

Full-line Load Commissioning

Simulate full-load start-stops, accumulation, and switch diverting; verify locating pin stopping accuracy (≤3mm) and drive motor overload protection (SEW reducer floating protection) response speed.

04.

Safety and Error-proof Testing

Trigger photoelectric sensors and emergency stop pull cords to confirm the anti-fall mechanism (anti-backup on inclines) instantly locks, preventing workpiece drops.

 

2.jpg
1.jpg

 

FAQ

Q: How is the conveyor track protected from heavy weld spatter in the welding shop for the automotive conveyor system?

A: Protective covers are needed for skid tracks and drive chain areas; trench sections should be equipped with cover plates and chip cleaners. High-pressure air guns should be used regularly to clean track surface dust, preventing weld spatter from jamming trolleys.

Q: How does the paint shop conveyor system handle the high temperatures of curing ovens?

A: Track sections passing through curing ovens require high-temperature grease, and skid support blocks should use heat-resistant alloys; thermal expansion gaps must be reserved in the design to prevent high-temperature deformation and jamming.

Q: How are collisions between workpieces and equipment prevented during mixed-model production?

A: RFID or vision recognition systems should be configured to read model signals. The control system (PLC) automatically adjusts locating pin positions, fixture opening/closing, and robotic arm trajectories based on the model, combined with safety light curtains for dual hardware-software interlocking.

 

 

Hot Tags: automotive conveyor system, China automotive conveyor system manufacturers, suppliers, factory, heavy-duty overhead conveyor, overhead conveyor crate handling, overhead conveyor customs clearance, overhead conveyor integration, overhead conveyor local market, overhead conveyor pallet handling technology