Overhead Monorail Conveyor

Overhead Monorail Conveyor

The overhead monorail conveyor is a single-track handling system that uses a continuous chain or wire rope to tow suspended carriers along a single I-beam or enclosed steel track, moving materials through the space above the workshop floor.
Send Inquiry

For this overhead monorail conveyor, carriers or slide frames hang directly below a single track. The system is powered by motor-reducer units providing constant or variable speed output, with a single drive station capable of covering a conveying distance of up to 500 meters. Through program control, carriers can stop or accumulate at specific stations, linking multiple independent processes into a rhythmic production flow.

 

Common Monorail Configurations and Applications

 

Structure Type

Traction Method

Load Capacity

Application Scenario

General (e.g., WFJ series)

Die-forged chain

5-500kg

Home appliances, auto parts, light assembly

Heavy-duty (e.g., PX/WT series)

Heavy chain / multi-drive

Above 500kg

Casting, metallurgy, EV battery packs

Wire rope traction

Wire rope + push dog

Depends on rope spec

Long distance, low-noise environments

 

Engineering Details of Track and Drive Components

 

 

 

Track Material and Alignment

Made of 16Mn high-quality alloy I-beam steel with high strength and wear resistance; straight sections must be aligned before installation to ensure smooth carrier running without jamming.

01

Horizontal Turn Mechanism

Equipped with back-up roller turn or traction wheel turn devices to reduce running resistance at curves; extended lubrication nozzles are installed inside the traction wheel hub and at the back-up roller shaft ends for easy maintenance.

02

Power Chain Material

Uses WEEB die-forged detachable chain with 45Mn2 links and 50Mn pins, both heat-treated; the X-458 chain has a theoretical pitch of 102.4mm, breaking load of 186kN, allowable tensile force of 15kN, and safety factor greater than 12.

03

Lubrication Points

Oil mist auto-lubrication equipment is installed at the take-up station exit (where tension is minimal), injecting oil to pins at fixed intervals; the backup trolley has a dedicated grease injection device.

04

 

FAQ

Q: What causes frequent vibration or jamming of the overhead monorail conveyor at curves?

A: This is usually caused by uneven track joints or too small a turning radius. Track connection clearance should be controlled within 0.33mm; if carrier bearings lack lubrication, curve resistance will also increase, so check whether the extended nozzles are clogged.

Q: If a station needs to be added temporarily, can the monorail system be expanded quickly?

A: Yes. The conveyor system supports line changes or new line additions according to process requirements. Switch devices enable directional changes horizontally, vertically, or on inclines, and can connect with various types of material conveying equipment.

Q: If the power chain makes abnormal noise after long-term operation, how do I determine if replacement is needed?

A: First check whether the stroke detection switch at the take-up station alarms to confirm chain slack or jamming. If pitch elongation or severe pin wear causes the engagement position between the push dog and H attachment to shift, the die-forged chain segments need to be replaced in batches according to pitch.

 

 

Hot Tags: overhead monorail conveyor, China overhead monorail conveyor manufacturers, suppliers, factory, overhead conveyor compatibility, overhead conveyor integration, overhead conveyor packaging technology, overhead conveyor part handling, overhead conveyor replacement, overhead conveyor width