Automotive Skid Conveyor

Automotive Skid Conveyor

The automotive skid conveyor is a heavy-duty conveying system specifically designed for automotive and component assembly and welding lines, using skids as carriers to smoothly transfer vehicle bodies or chassis modules along floor tracks.
Send Inquiry

This automotive skid conveyor changes the force-bearing method of traditional overhead suspension. Vehicle bodies or workpieces are directly supported on the skids below and run along floor tracks. The system achieves skid stepping and positioning through friction drive or chain traction, capable of carrying heavier workpieces and facilitating workers to perform assembly operations directly on the skids.

 

Product Applications

 

Automotive Process

Typical Workpiece

Scenario Matching Features

Welding Shop

Body-in-white (BIW)

Heavy load stability, adapts to multi-model flexible switching

Paint Shop

Vehicle body (through curing oven)

Must withstand high temps; skid lubricants need heat resistance

Final Assembly

Chassis, powertrain, battery packs

Precise stopping (mm-level), facilitates robot and manual coordination

 

Customization Services

 

 

 

Drive and Takt Customization: Configure friction wheel drives or accumulating chain traction based on the capacity requirements of final assembly or welding lines, meeting frequent start-stop and high-takt demands.

Skid Structure Customization: Customize the support points and locating pins on the skid body for different vehicle chassis dimensions (e.g., EV battery packs, traditional engines).

System Control and Safety Interlock: Integrate PLC control, configure anti-collision detection and skid presence signals to ensure safe separation between assembly personnel and moving skids.

High-temperature and Dust-proof Treatment: For paint shop curing oven sections, customize high-temperature bearings and grease; for welding dust, add sealed protection to drive components.

image-20250515174610-4.png
FAQ

Q: How does the automotive skid conveyor ensure extremely high stopping accuracy in auto plants?

A: Cylinder or motor-driven locating pin devices are typically configured below the stations, with positioning accuracy controlled within 3mm. When the skid approaches the station, a deceleration signal triggers speed reduction, and the locating pin inserts into the positioning hole at the skid bottom, ensuring accuracy for robotic arms or manual operations.

Q: If an automaker needs to switch production to models with different wheelbases, how is the skid system adjusted?

A: For mixed-model production, adjustable support blocks or flexible positioning mechanisms are usually designed on the skid. During model changeover, only the support points on the skid need adjustment, without changing the underlying tracks. This places extremely high demands on the system's flexible customization capability.

Q: Why is the failure rate of skid conveyors in paint shops relatively high?

A: Paint lines pass through high-temperature curing ovens and water wash tanks. High temperatures cause conventional grease to fail, and water washing easily leads to bearing corrosion. Therefore, high-temperature grease, stainless steel, or anti-corrosion coated components must be used. If daily inspections fail to detect lubricant loss, jamming can easily occur.

 

 

 

Hot Tags: automotive skid conveyor, China automotive skid conveyor manufacturers, suppliers, factory, overhead conveyor evolution, overhead conveyor industry benchmarks, overhead conveyor marketing strategy, overhead conveyor quotation, overhead conveyor replacement, overhead conveyor unique selling point