Load capacity should be checked before a floor conveyor system enters daily production. A simple ground route may carry repeated product weight, frame vibration, and start-stop force during every shift. If the support frame, roller section, belt section, or connection point is too light for the duty, the line may shake and need frequent adjustment.
A floor conveyor system can support heavy transfer work when the load is matched with product size, contact length, support spacing, and the number of items moving on the same section. The 1000 kg/m capacity value should be treated as a planning point for the complete route, not as a reason to ignore frame strength, roller spacing, or drive condition.
Continuous use also needs attention to wear points. Rollers should rotate smoothly. Belt sections should keep proper tension. Side guides and stop points should stay fixed. In dusty or heavy-duty workshops, cleaning and routine checks help prevent small alignment problems from becoming larger faults after many operating hours.
A safe floor conveyor system plan considers load, route direction, workstation access, and maintenance space together. When these points are checked before production, the conveyor can support steady movement and reduce unnecessary manual handling.