This skillet conveyor system for vehicle assembly line separates the power chain from the load-bearing track. The chain circulates in a trench below the floor while carts slide on tracks above the trench. This structure prevents the chain from drop impact and allows workers to freely cross and operate on both sides, commonly used in automotive final assembly and heavy machinery assembly lines.
Product Craftsmanship
Trench and Cover Plate Design
Floor trenches require waterproofing and drainage to prevent chips or oil accumulation causing chain jamming; anti-slip steel plates cover the top and must be quickly openable for maintenance.
Heavy-duty Sprockets and Bent-plate Chains
Large-pitch bent-plate roller chains are used, with sprocket teeth medium-frequency hardened; wear-resistant guide rails are laid below the chain to reduce sliding friction and sag under heavy loads.
Cart Guide Assembly
Double-row guide wheels are installed at the cart bottom to fit the floor track sides; a push rod connection plate is set at the cart top to engage with chain push blocks in the trench.
Anti-jamming and Chip Evacuation
Cleaning brushes or scrapers are installed in the chain return section to promptly discharge iron chips from the trench; overload clutches are added to key drive sections to stop automatically upon obstruction.
Product Advantages

Convenient Floor Operations: Workpieces run at ground level, allowing workers to stand directly on both sides for assembly without climbing or bending, reducing work intensity.
Impact and Contamination Resistance: The chain is hidden in the trench, protected from above drop materials, welding slag, and heavy object impact, and oil contamination does not easily affect workpieces.
Good Heavy-load Adaptability: Large-specification chains and multi-point drive configurations can carry tens of tons of workpieces, meeting conveying needs for heavy chassis or construction machinery.
Safety Isolation: Cover plates above the trench isolate the running chain, preventing accidental personnel contact injuries; combined with floor locating pins for precise stopping.
FAQ
Q: What to do if iron chips and oil sludge accumulate in the trench of the skillet conveyor system for vehicle assembly line, causing chain deviation?
A: The trench must be periodically opened and cleaned. It is recommended to install automatic scraper cleaners in the return section and retrofit trench drainage; if the chain has already deviated, adjust the left-right travel of the tail tensioning mechanism.
Q: How to detect if the trench chain has broken?
A: A proximity switch or stroke detection sensor can be installed at the tensioning end. When the chain breaks, the tensioning cylinder stroke will instantly reach its limit, triggering the sensor alarm and cutting off the main drive motor.
Q: How to mitigate the front-rear impact noise of carts during frequent start-stops of the ground drag chain?
A: Polyurethane buffer pads can be added between the push dog and the cart connection plate, and the drive motor start-stop curve can be optimized (adding a variable frequency drive for soft starting) to reduce instantaneous impact force.
Hot Tags: skillet conveyor system for vehicle assembly line, China skillet conveyor system for vehicle assembly line manufacturers, suppliers, factory

